MFC-9440CN
 |
FAQs & Troubleshooting |
MFC-9440CN
Date: 29/01/2019 ID: faq00100619_000
When I scan multiple page documents using the ADF, all pages are feeded, but only page 1 shows in XSANE. (Linux)
For XSANE 0.98 or earlier :
You will have to modify the multipage scanning option in XSANE.
In XSANE, click on Preferences, Setup, Enhancements. Change the "Automatic document Feeder Modus:" from "None" to " Automatic Document Feeder".
For XSANE 0.99 or later :
You will have to indicate the number of pages. Increase the number in the box at the top left corner on the XSANE main window.
DCP-135C, DCP-145C, DCP-165C, DCP-195C, DCP-350C, DCP-375CW, DCP-385C, DCP-560CN, DCP-585CW, DCP-6690CW, DCP-7010, DCP-7010L, DCP-7025, DCP-7030, DCP-8060, DCP-8065DN, DCP-8070D, DCP-9010CN, DCP-9040CN, DCP-J125, FAX-2920, MFC-235C, MFC-250C, MFC-255CW, MFC-465CN, MFC-490CW, MFC-5860CN, MFC-6490CW, MFC-7420, MFC-7440N, MFC-7820N, MFC-795CW, MFC-8220, MFC-8370DN, MFC-8380DN, MFC-8460N, MFC-8860DN, MFC-8880DN, MFC-9120CN, MFC-9320CW, MFC-9440CN, MFC-9840CDW, MFC-990CW, MFC-J220
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.