FAQs & Troubleshooting

Close

ADS-3000N

FAQs & Troubleshooting

FAQs & Troubleshooting

ADS-3000N

Not your product?

Date: 28/07/2016 ID: faq00100339_000

Reset the Scheduled maintenance counter

When you clean the pick up roller and reverse roller, you also need to reset the Scheduled maintenance counter by completing the following steps:

NOTE: The screens may differ depending on your operating system and your Brother machine.

Reset the Scheduled maintenance counter only after cleaning the pick up roller and reverse roller.

> Click here to see how to clean the rollers.

  1. Start the ControlCenter application.

    (Windows)
     
    1. Click the ControlCenter4(ControlCenter4) icon in the task tray and select Open from the menu. The ControlCenter4 window appears.
    2. Open the Device Settings.

      [Home Mode]
      Click the Device Settings tab.
      Device Settings
      [Advanced Mode]
      Click the Settings(Settings) icon to access Device Settings.
      Device Settings

    (Macintosh)
     
    1. Click the ControlCenter2(ControlCenter2) icon in the Dock. The ControlCenter2 window appears.
    2. Click the DEVICE SETTINGS tab.
      Device Settings
  2. Click Remote Setup. The Remote Setup window appears.
  3. Select Machine Info. in the navigation tree, select the Scheduled maintenance counter check box, and then click Apply.
    Reset counter for scheduled maintenance alert

Related FAQs

Related Models

ADS-2400N, ADS-2800W, ADS-3000N, ADS-3600W

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.