FAQs & Troubleshooting

Close

PT-P750W

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 18/10/2023 ID: faqp00100014_000

Where can I find the IP addresses of my computer and the printer?

Follow the steps below to check the IP addresses of your computer and printer.

 

How to check the IP address of your computer

 For Windows

 For Mac

 

For Windows:

 

  1. Windows 11:
    Click [Start menu] - [All apps] - [Windows Tools] - [Control Panel].

    Windows 10:
    Click [Start menu] - [Windows System Tool] - [Control Panel].

  2. Click [Network and Internet] - [Network and Sharing Center] - [Change adapter settings].
    (The screenshots may differ depending on your Windows version.)
    Click Change Adapter Settings

  3. Click the Local Area Connection (wired) or Wireless Network Connection (wireless), and then click [Details] in the displayed dialog box.
    Click Details
  4. Check the IP address and the subnet mask.
    The IP address may be described as "IPv4".
    Check IP Address

 

For Mac:

 

  1. From the Apple Menu, open [System Settings]/[System Preferences].

  2. Click [Network].

  3. Click [Details]/[Advanced].

  4. Click [TCP/IP] and check the [IP address]/[IPv4 Address] and [Subnet mask].

    Make sure that the Subnet mask is "255.255.255.0".
    If your Subnet Mask is different, please consult a network administrator to solve the problem. (This FAQ is not applicable for your network environment.)

How to check the IP address of your printer

 

You can confirm the IP address in two ways:
Checking the Communication settings in the Printer Setting Tool or printing out a printer configuration report from your printer.

 

Related FAQs

Related Models

PT-E850TKW, PT-P750W, PT-P900W, PT-P950NW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.