SDX900
FAQs & Troubleshooting |
SDX900
Date: 01/02/2019 ID: faqh00101298_000
Embroidery data (.phc, .pes or .phx files) read from a USB flash drive is not displayed.
Possible cause
Possible cause 1 : The Software version for your cutting machine may be old.
Possible cause 2 : Your cutting machine may not support reading embroidery data.
Solution
The Software version for your cutting machine may be old. This problem may be solved by updating to the latest version. Check the software version according to the following procedure. If the version is earlier than 1.10, update to the latest version.
-
Touch in the home screen.
-
Touch until Ver. appears, and then check the version information.
If the version is earlier than 1.10, follow the procedure below to update the machine to the latest version.
When the cutting machine is connected to a wireless network :
To update the machine, touch the Ver. button, and then touch in the screen that appears.
When the cutting machine is not connected to a wireless network :
Download the program from here , and then update the machine. Follow the procedure on the download page to update the machine.
Follow the procedure below to check if your cutting machine supports reading embroidery data.
-
Touch in the home screen.
-
Touch until Machine Information appears.
Touch Machine Information, and then check the information beside Embroidery Data (.PES/.PHC).
SDX1200, SDX900
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.