PR680W / PR680WC
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_pr680weas.jpg)
PR680W / PR680WC
Date: 22/08/2016 ID: faqh00100221_000
How do I embroider on small pieces of fabric ?
This section provides information on embroidering fabric that is much smaller than the embroidery frame.
Embroidering small pieces of fabric
When embroidering pieces of fabric that are smaller than the embroidery frame, use spray fabric adhesive to attach the fabric to stabilizer (backing) hooped in the embroidery frame. With fabrics where you do not wish to use spray adhesive, baste the fabric to the stabilizer (backing).
(1) | Fabric |
(2) | Stabilizer (backing) |
Embroidering the corner of fabric
When embroidering the corner of a piece of fabric, use spray fabric adhesive to attach the corner of the fabric to stabilizer (backing), and then hoop the stabilizer (backing) in the embroidery frame. With fabrics where you do not wish to use spray adhesive, baste the fabric to the stabilizer (backing).
(1) | Fabric |
(2) | Stabilizer (backing) |
Embroidering narrow pieces of fabric, such as ribbon
When embroidering narrow pieces of fabric, use spray fabric adhesive to attach the fabric to stabilizer (backing), and then hoop the stabilizer (backing) in the embroidery frame. With fabrics where you do not wish to use spray adhesive, clamp both ends of the fabric, together with the stabilizer (backing), in the embroidery frame.
(1) | Fabric |
(2) | Stabilizer (backing) |
PR1050X, PR1055X, PR1X, PR670E / PR670EC, PR680W / PR680WC, VR
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.