Innov-is 55P
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_inov55peas.jpg)
Innov-is 55P
Date: 24/01/2014 ID: faqh00000465_000
How do I manually thread the needle?
When using special thread, thread with a thickness of 130/20 or thicker, the wing needle or the twin needle which cannot be used with the needle threader, thread the needle as described below.
-
Thread the machine to the needle bar thread guide.
-
Lower the presser foot lever.
Presser foot lever
-
Pass the thread through the eye of the needle from front to back.
- Raise the presser foot lever, pass the end of the thread through the presser foot, and then pull out about 5 cm (2 inches) of thread toward the rear of the machine.
Related FAQs
BM-3500/2600, Innov-is 30, Innov-is 35P, Innov-is 50, Innov-is 55P, Innov-is 900, Innov-is 950, Innov-is 955
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.