PE-DESIGN Lite
FAQs & Troubleshooting |
PE-DESIGN Lite
Date: 24/01/2014 ID: faqh00000029_002
When an original card is inserted into the machine, the message "This embroidery card cannot be used." appears, and embroidering is not possible.
This may occur in any of the following three circumstances.
If the above-mentioned message appears when a pattern in the Design Page in PE-DESIGN Lite is written to an original card
If the above-mentioned message appears when multiple embroidery data are written to an original card in PE-DESIGN Lite
-
If the above-mentioned message appears when a pattern in the Design Page in PE-DESIGN Lite is written to an original card
An incorrect Design Page size may have been selected.
Click Option on the menu bar, and then click Design Page Property.
The Design Page Property dialog box appears.
From the Hoop size selector, choose the size of hoop that can be used with your machine.
-
If the above-mentioned message appears when multiple embroidery data are written to an original card in PE-DESIGN Lite
An incorrect hoop size may have been selected when writing multiple data.
Click File on the menu bar, point to Write to Card, and then click Other PES Files.
The Write to Card dialog box appears.
Check the hoop size selected in the Hoop size selector.
Select a hoop size no larger than the embroidery hoop that can be used with your machine.
An original card cannot be used if it was created with a hoop size larger than the embroidery hoop that can be used with your machine.
Related FAQs
PE-DESIGN Lite
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.