MFC-9330CDW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc9330cdw_us_eu_as.jpg)
MFC-9330CDW
Date: 21/11/2013 ID: faq00002674_001
Fuser Error or Self-Diagnostic
- The temperature of the fuser unit does not rise to a specified temperature within the specified time.
- The fuser unit is too hot.
Please follow the steps below to solve the problem:
- Turn the machine's power switch off, wait a few seconds, and then turn it on again.
- Leave the machine for 15 minutes with the power on.
- If the error still remains, please contact Brother Customer Service from "Contact Us" or call your dealer and report the error status, Fuser Error or Self-Diagnostic.
DCP-1511, DCP-1601, DCP-1610W, DCP-1616NW, HL-3150CDN, HL-3170CDW, HL-5440D, HL-5450DN, HL-6180DW, MFC-1811, MFC-1901, MFC-1910W, MFC-1916NW, MFC-8910DW, MFC-9140CDN, MFC-9330CDW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.