FAQs & Troubleshooting

Close

HL-6180DW

FAQs & Troubleshooting

FAQs & Troubleshooting

HL-6180DW

Not your product?

Date: 29/03/2012 ID: faq00002541_007

Clean the paper pick-up roller.

If the paper pick-up roller is stained, the printer may not feed paper. Please follow the steps below to clean the paper pick-up roller.

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

  1. Turn off the power switch.

    Turn off power switch

  2. Disconnect the interface cables from the machine, and then unplug the power cord from the AC power outlet (electrical socket).
  3. Pull the paper tray out of the machine.


    Pull out paper tray

  4. Tightly wring out a lint-free cloth soaked in lukewarm water, and wipe the separator pad (1) in the paper tray with it.


    Wipe separator pad

  5. Wipe the two paper pick-up rollers (1) inside the machine.


    Wipe paper pick-up rollers

  6. Put the paper tray back in the machine.


    Put paper tray back in printer

  7. Make sure that you have turned off the power switch, and then plug the machine's power cord back into the AC power outlet (electrical socket) first, and connect the interface cables.
  8. Turn on the power switch of the machine.

Related Models

HL-5440D, HL-5450DN, HL-6180DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.