HL-7050N
 |
FAQs & Troubleshooting |
HL-7050N
Date: 16/10/2006 ID: faq00002128_000
Printer does not recognize the HDD/Compact Flash.
Make sure of the following points:
- If you are using the HD-6G/EX, make sure that the HDD cable is connected correctly and that you are using the appropriate cable.
- Make sure that the HDD/Compact Flash is installed correctly.
- Make sure that the installed HDD/Compact Flash is formatted correctly.
To format the compact Flash or HDD correctly, follow these steps:
- Press the '+' or '-' keys until 'SETUP' is displayed.
- Press the 'SET' button.
- Press the '+' key until 'DELETE STORAGE' is displayed.
- Press the 'SET' button.
- Press the '+' key until 'FORMAT(CF)' is displayed (if you are using a HDD select the HDD option 'FORMAT(HD)')
- Press the 'SET' button
- Press 'SET' to acknowledge the 'OK?'.
- The Compact Flash or HDD memory will now be formatted.
Turn off the printer. Wait a few seconds, and then turn it on again.
If this error message appears again, replace the HDD/Compact Flash with a new one.
HL-7050N
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.