HL-5340D
 |
FAQs & Troubleshooting |
HL-5340D
Date: 25/10/2005 ID: faq00000098_005
What is the printable area per page?
When using PCL (standard driver) emulation, the edges of the paper that cannot be printed on are shown in the tables below.
Please note when using BR-Script emulation, all the edges of the paper that cannot be printed on are 4.32 mm (0.17 in.).
Portrait
| A4 | Letter | Legal | B5(ISO) | Executive | A5 | A6 | B6 | |
| 1 | 4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
| 2 | 6.01mm (0.24in.) |
6.35mm (0.25in.) |
6.35mm (0.25in.) |
6.01mm (0.24in.) |
6.35mm (0.25in.) |
6.01mm (0.24in.) |
6.01mm (0.24in.) |
6.01mm (0.24in.) |
| 3 | 4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
| 4 | 6.01mm (0.24in.) |
6.35mm (0.25in.) |
6.35mm (0.25in.) |
6.01mm (0.24in.) |
6.35mm (0.25in.) |
6.01mm (0.24in.) |
6.01mm (0.24in.) |
6.01mm (0.24in.) |
Landscape
| A4 | Letter | Legal | B5(ISO) | Executive | A5 | A6 | B6 | |
| 1 | 4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
| 2 | 5.0mm (0.19in.) |
5.08mm (0.2in.) |
5.08mm (0.2in.) |
5.0mm (0.19in.) |
5.08mm (0.2in.) |
5.0mm (0.19in.) |
5.0mm (0.19in.) |
5.0mm (0.19in.) |
| 3 | 4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
4.23mm (0.16in.) |
| 4 | 5.0mm (0.19in.) |
5.08mm (0.2in.) |
5.08mm (0.2in.) |
5.0mm (0.19in.) |
5.08mm (0.2in.) |
5.0mm (0.19in.) |
5.0mm (0.19in.) |
5.0mm (0.19in.) |
HL-5240, HL-5250DN, HL-5340D, HL-5350DN, HL-5380DN
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.