FAQs & Troubleshooting

Close

PJ-662

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 12/25/2019 ID: faqp00001469_002

How to install the rechargeable Li-ion Battery (Optional)

Installing the rechargeable Li-ion battery

 

  1. Open the battery cover by pressing the cover latch.
    battery cover 1. Battery cover
    2. Cover latch

     

  2. Swing the cover open and remove it.
     
  3. Move the slide switches on the rechargeable Li-ion battery inward, and then insert the battery into the battery compartment.
    Slide switches 3. Slide switches

    When installing the rechargeable Li-ion battery, insert the battery removal ribbon into the battery compartment, and then install the battery. The battery removal ribbon is not needed when removing the rechargeable Li-ion battery.

  4. Move the slide switches outward to lock the battery in place.
    • The voltage supplied by the rechargeable Li-ion battery fluctuates. The printing speed may also fluctuate depending on the voltage.
       
    • When the rechargeable Li-ion battery is being used, the battery cover will not be needed. Keep it in a safe place so that it will not be lost.

 

Removing the rechargeable Li-ion battery
 

Move the slide switches on the rechargeable Li-ion battery inward, and then remove the battery from the printer.

slide switches 1. Slide switches

Related FAQs

Related Models

PJ-622, PJ-623, PJ-662, PJ-663, PJ-673

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.