FAQs & Troubleshooting

Close

MFC-9325CW

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-9325CW

Not your product?

Date: 11/19/2012 ID: faq00000216_022

Colored spots at 94 mm (3.7 in.) intervals or at 30 mm (1.2 in.) intervals

Colored spots at the regular intervals


To solve the problem, follow the instructions below for your case:


Case 1: Colored spots at 94 mm (3.7 in.) intervals

Please check the following points to solve the problem:

  1. The drum unit or toner cartridges may not be installed correctly. Re-install the drum unit and toner cartridges.


  2. The drum unit may have glue from a label stuck on the drum surface. Clean the drum unit as follow:

    1. Click here to print the chart. [345KB/ PDF]
    2. Compare your printed document with the printed chart to identify the color causing the problem.
    3. Clean the drum unit of the color. Click here to see the details of how to clean the drum unit.

  3. If the problem continues, the drum unit may be damaged. Put in a new drum unit of the color causing the problem. Click here to see the details of how to replace the drum unit.


Case 2: Colored spots at 30 mm (1.2 in.) intervals

Please check the following points to solve the problem:

  1. The drum unit or toner cartridges may not be installed correctly. Re-install the drum unit and toner cartridges.


  2. The toner cartridge may be damaged. Put in a new toner cartridge as follow:

    1. Click here to print the chart. [345KB/ PDF]
    2. Compare your printed document with the printed chart to identify the color causing the problem.
    3. Replace the toner cartridge of the color. Click here to see the details of how to replace the toner cartridge.

Related Models

HL-3045CN, HL-3075CW, MFC-9125CN, MFC-9325CW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.