MFC-9130CW
 |
FAQs & Troubleshooting |
MFC-9130CW
Date: 01/29/2013 ID: faq00000023_008
Adjust the print position of each color.
Follow the auto registration instruction below.
- Press
(Toner).
- Press Auto Regist..
- Press Yes to confirm.
Now the print position of each color is adjusted automatically. - When the machine's display shows Completed, press
(Home).
If you want to set the interval time to perform the auto registration, do the following:
- Press
(Settings).
- Press All Settings.
- Swipe up or down, or press the Up or Down arrow key to display Printer.
Press Printer. - Swipe up or down, or press the Up or Down arrow key to display Frequency.
Press Frequency. - Press Normal, Low or Off.
Normal is configured as the default setting for the interval time. - Press
(Home).
DCP-9020CDN, HL-3180CDW, MFC-9130CW, MFC-9330CDW, MFC-9340CDW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.