FAQs & Troubleshooting



FAQs & Troubleshooting

FAQs & Troubleshooting


Not your product?

Date: 12/25/2018 ID: faq00000315_016

Replace WT Box

Follow the steps below to replace the waste toner box.

  1. Make sure that the machine is turned on.
  2. Press the front cover release button and then open the front cover.

    Open Front Cover
  3. Hold the blue handle of the drum unit. Pull the drum unit out until it stops.

    Pull Drum
  4. Turn the blue lock lever (1) at the left of the machine counterclockwise to the release position. Holding the blue handles of the drum unit, lift the front of the drum unit and remove it from the machine.

    Lock Lever Counterclockwise
  5. Hold the blue handle of the belt unit with both hands and lift the belt unit up, and then pull it out.

    Lift Belt
  6. Remove the two pieces of orange packing material and discard them.

    Remove Orange Material
  7. Hold the blue handle of the waste toner box and remove the waste toner box from the machine.

    Remove WT Box
  8. Unpack the new waste toner box and install it in the machine using the blue handle. Make sure the waste toner box is level and fits firmly into place.

    Unpack WT Box
  9. Slide the belt unit back into the machine. Make sure the belt unit is level and fits firmly into place.

    Slide Belt
  10. Make sure the blue lock lever (1) is in the release position as shown in the illustration.

    Lock Lever Release Position
  11. Gently slide the drum unit into the machine until it stops at the blue lock lever.

    Slide Drum
  12. Turn the blue lock lever (1) clockwise to the lock position.

    Lock Lever Clockwise
  13. Push the drum unit in until it stops.

    Push Drum
  14. Close the front cover of the machine.

Related Models

HL-L8250CDN, HL-L8350CDW, HL-L8350CDWT, HL-L9200CDW, HL-L9200CDWT, HL-L9300CDW(T)

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.