HL-L6200DW(T)
 |
FAQs & Troubleshooting |
HL-L6200DW(T)
Date: 02/26/2020 ID: faq00100214_500
Reset the Drum Counter
When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:
- IMPORTANT
- DO NOT reset the drum counter unless you are replacing the drum unit.
HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L5200DWT/HL-L6200DW/HL-L6200DWT
- Make sure the machine is turned on.
- Open the front cover.
- Press and hold OK for about two seconds to display the [Drum Unit] option, and then press OK.
- Press
for [Reset] to reset the drum counter. - Close the front cover of the machine.
HL-L6300DW
- Make sure the machine is turned on.
- Press
. - Press and hold [Drum Life].
- Press [Yes].
- Press
.
Related FAQs
HL-L5000D, HL-L5100DN, HL-L5102DW, HL-L5200DW(T), HL-L5202DW, HL-L6200DW(T), HL-L6202DW, HL-L6300DW, HL-L6402DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.