HL-2600CN
 |
FAQs & Troubleshooting |
HL-2600CN
Date: 10/16/2006 ID: faq00000292_021
What kind of memory can I use?
This printer has 64 Mbytes of standard memory and 3 slots for optional expansion memory. The memory can be expanded by 384 Mbytes by installing commercially available dual in-line memory modules (DIMMs). (The standard memory fitted can vary depending on the printer model and the country.).
The installation of additional memory can help the printer process the print job faster and reduce the chance of the printer running out of memory if you are printing complex graphical print jobs.
This printer uses memory modules that are:
100 pins, no-parity, SDRAM with 64Mbit or more.
This printer is not compatible with Extended Data Output (EDO) DIMM, or DIMM that uses 16Mbit SDRAM.
The following capacity of DIMMs can be installed:
<Europe>
| Size |
Manufacture |
No. |
| 16 MB | BUFFALO TECHNOLOGY | 12323-0001 |
| 32 MB | BUFFALO TECHNOLOGY | 12324-0001 |
| 64 MB | BUFFALO TECHNOLOGY | 12325-0001 |
| 128 MB | BUFFALO TECHNOLOGY | 12326-0001 |
<USA>
| Size |
Manufacture |
No. |
| 16 MB | TECHWORKS | 12456-0001 |
| 32 MB | TECHWORKS | 12457-0001 |
| 64 MB | TECHWORKS | 12458-0001 |
| 128 MB | TECHWORKS | 12459-0001 |
For more information, visit Techworks/Buffalo web site at http://www.techworks.com/
In general, the DIMM must have the following specifications:
| Type: | 100 pin and 32 bit output |
| CAS Latency: | 2 |
| Clock frequency: | 66 MHz or more |
| Capacity: | 16, 32, 64 MB or 128 MB |
| Height: | 46 mm (1.8 inches) or less |
| Parity: | None |
| DRAM Type: |
64M bit SDRAM 4 Bank |
For more information, consult with the dealer where you purchased the printer.
Content Feedback
Please note this form is used for feedback only.