HL-1240
 |
FAQs & Troubleshooting |
HL-1240
Date: 11/19/2007 ID: faq00002249_000
The Drum LED is still lit even after replacing the old drum unit with a new one. What can I do?
If the Drum LED is still lit after replacing the drum unit, the Drum counter may not be reset.
Reset the Drum counter as follows:
Do not reset the Drum counter when you do not replace the Drum unit.
- Open the front cover.
- Locate the control panel button under the LED lights on the left side.
- Press the control panel button until all lights are lit, then release it.
The Drum counter is now reset.
Related FAQs
HL-1030, HL-1230, HL-1240, HL-1250, HL-1270N, HL-1440, HL-1450, HL-1470N
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.