XR4040
 |
FAQs & Troubleshooting |
XR4040
Date: 10/15/2020 ID: faqh00101099_002
The bobbin thread cannot be pulled up.
-
Needle is turned, bent or the point is dull.
Replace the needle.
Refer to How do I change the needle ?
-
Bobbin is set incorrectly.
Reset the bobbin thread correctly.
Refer to How do I install the bobbin wound with thread ?
-
Upper threading is incorrect.
Check the steps for threading the machine and rethread the machine correctly.
Refer to How do I thread my machine ?
Related FAQs
BB370, BM2800, BM3700, BM3730, BM3850, BX2925PRW, BX3000, CE1000, CE1008, CE1010, CE1100PRW, CE1125PRW, CE1150, CE1155, CE4400, CE-5000/5000PRW, CE-5500/CE-5500PRW, CE5500T, CE6006, CE6070T, CE6080T, CE6085T, CE7070PRW, CE7700, CE8080/CE8080PRW, CE8100, CP100X, CP2160F, CP2160L, CP2160M, CP2160P, CP2160R, CP2160W, CP2410, CP60X, CP-6500, CP-7500, CP80X, CS-100T/4000/5000H, CS5055, CS5055PRW, CS-6000/6000b/6000t/6000i, CS6000XL, CS7000i, CS7000X, CS7130, CS7205, CS8800PRW, CS9100, DZ2400, DZ2750, DZ3000, DZ3400, ES-2000/2000T, EX-660, FB1757T, FB1757X, GQ3700, GX37, H537ST, HC1850, HC3010, HC7140, HS-2000, HS-2500, HS-3000, JS2135, JS60, JX1400, JX1410, JX1420, JX1710, JX1714, JX2217, JX2417, JX2517, JX3135F, LX2500, LX2763, LX3817, LX3817A, LX3817G, LX3850, MZ53, ND50E, PS100, PS200T, PS300T, QB9110L, SB1000T, SB170, SB530T, SB700T, SC3000, SC6600, SC707, SC9500, SH6600, SH7700, SM1400, SM1704, SM1738D, SM2700, SM3701, SM8270, SQ-9000, SQ9050, SQ9100, SQ9130, SQ9185, SQ9285, SQ9310, ST371HD, ST531HD, VX1445, VX3250F, XB2500, XB2510, XL2800, XL3700, XL3850, XL5600i, XL5800, XL5900, XM1010, XM2701, XM2800, XM3700, XM3710, XR1300, XR1355, XR3140, XR3240, XR3340, XR3774, XR37T, XR4040, XR53, XR6060, XR-7700, XR-9000, XR9500PRW, XR9550/XR9550PRW, XS2070, XS2080, XS2100, XS3109, XS37, XS6060, XS6070
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.
Please do not enter contact information or any other personal information here.
(We will not respond to any Feedback you send us.)