CP60X
 |
FAQs & Troubleshooting |
CP60X
Date: 05/07/2025 ID: faqh00101719_000
How do I turn on or off the settings of the automatic reverse or reinforcement stitching?
You can set the machine to automatically sew reverse or reinforcement stitches at the beginning and end of stitching.
(Default:Off)
-
Turn off the machine.
-
Holding down
(the plus key for the stitch length settings), turn on the machine.
-
After the machine has turned on, release .
The automatic reverse/reinforcement stitching function is turned on or off.
| Viewing the LCD | The automatic reverse/reinforcement stitching function is set to "Off" | The automatic reverse/reinforcement stitching function is set to "On" |
|---|---|---|
|
|
The automatic reverse/reinforcement stitching function indicator |
appears.The settings are stored even when the power switch is turned off.
For details, refer to "How to sew reverse stitches or reinforcement stitches"
Related FAQs
CE1010, CE1150, CE1155, CE6080T, CE6085T, CE7700, CP100X, CP2160F, CP2160L, CP2160M, CP2160P, CP2160R, CP2160W, CP60X, CP80X, CS5055, CS6000XL, CS7000X, ND50E, SH7700, XS6070
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.
Please do not enter contact information or any other personal information here.
(We will not respond to any Feedback you send us.)