CP2160M
 |
FAQs & Troubleshooting |
CP2160M
Date: 05/07/2025 ID: faqh00101715_000
How do I change the needle stop position?
You can change the needle stop position to either the lowered (in the fabric) or raised position.
(Default: Lowered position)
-
Turn off the machine.
-
Holding down
(the minus key for the tens digit of the stitch number selection), turn on the machine.
-
After the machine has turned on, release .
The needle stop position is changed.
| Viewing the LCD | The needle stop position is set to "Lowered position" | The needle stop position is set to "Raised position" |
|---|---|---|
| When the single needle mode is set |  |
 |
| When the twin needle mode is set |  |
 |
The settings are stored even when the power switch is turned off.
Related FAQs
CE1010, CE1150, CE1155, CE6080T, CE6085T, CE7700, CP100X, CP2160F, CP2160L, CP2160M, CP2160P, CP2160R, CP2160W, CP60X, CP80X, CS5055, CS6000XL, CS7000X, ND50E, SH7700, XS6070
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.
Please do not enter contact information or any other personal information here.
(We will not respond to any Feedback you send us.)