CP2160F
 |
FAQs & Troubleshooting |
CP2160F
Date: 05/16/2025 ID: faqh00101720_000
How do I change the needle mode?
You can change the needle mode to either the single or twin needle mode.
(Default: Single needle mode)
-
Turn off the machine.
-
Holding down
(the plus key for the first digit of the stitch number selection), turn on the machine.
-
After the machine has turned on, release .
The needle mode (single needle or twin needle) is changed.
| Viewing the LCD | The needle mode is set to "Single needle mode" | The needle mode is set to "Twin needle mode". |
|---|---|---|
| When the needle stop position is set to "Lowered position" |  |
 |
| When the needle stop position is set to "Raised position" |  |
 |
The settings are stored even when the power switch is turned off.
For details, refer to "How do I sew with the twin needle?"
Related FAQs
CE1010, CE1150, CE1155, CE6080T, CE6085T, CE7700, CP100X, CP2160F, CP2160L, CP2160M, CP2160P, CP2160R, CP2160W, CP60X, CP80X, CS5055, CS6000XL, CS7000X, ND50E, SH7700, XS6070
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.
Please do not enter contact information or any other personal information here.
(We will not respond to any Feedback you send us.)