CP2160F
 |
FAQs & Troubleshooting |
CP2160F
Date: 05/07/2025 ID: faqh00101716_000
How do I change the initial needle position?
You can change the stitch selected when the machine is turned on to either 
“straight stitch (left needle position)” or 
“straight stitch (middle (center) needle position)”.
(Default: Straight stitch [left needle position])
-
Turn off the machine.
-
Holding down
(the plus key for the tens digit of the stitch number selection), turn on the machine.
-
After the machine has turned on, release .
The initial needle position is changed.
The currently selected stitch can be confirmed by the stitch number in the LCD.
| Stitch | Stitch name | No. | Viewing the LCD |
|---|---|---|---|
|
Straight stitch (Left) | 00 |  |
|
Straight stitch (Middle) | 01 |  |
The settings are stored even when the power switch is turned off.
Related FAQs
CE6080T, CE6085T, CE7700, CP100X, CP2160F, CP2160L, CP2160M, CP2160P, CP2160R, CP2160W, CP60X, CP80X, CS5055, CS6000XL, CS7000X, ND50E, SH7700, XS6070
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.
Please do not enter contact information or any other personal information here.
(We will not respond to any Feedback you send us.)