FAQs & Troubleshooting

Close

GL-100

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 05/15/2020 ID: faqp00000848_005

How can I minimize the tape margin?

Follow the steps below:

  1. Press F.  "- F - " appears on the LCD.
  2. Continue pressing F or Cursor until "MARGIN" is displayed.
  3. Press Enter.
  4. Press Cursor until "NARROW" is displayed.
  5. Press Enter to apply the setting.
  6. Press Print.
  7. Cut along the dots " : " with scissors so that the text is centered in the label.

    Sample

1 inch (25 mm) margin that is produced prior to every label cannot be eliminated due to the construction of the tape mechanism. However, when you print more than one label continuously, the subsequent labels can be printed without the excess tape.

The following methods are useful for reducing tape use:

  • Using the "Numbering function" - please refer to "When I try to use Numbering function, an error occurs.".
  • Setting the tape margin to "Chain" - please make sure that you press the feed button after the last label is printed, otherwise a part of the text may be cut off.

Related Models

GL-100, PT-1000

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.