FAQs & Troubleshooting

Close

DS-820W

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 10/15/2018 ID: faq00003092_000

Change the image settings. (Using DSmobileCapture)

Follow the steps below to change image settings.

 

NOTE: Illustrations and instructions may vary depending on the application you are using.

 

(Windows)
(Macintosh)

 

(Windows)
  1. Launch DSmobileCapture.

     

    1. Connect the supplied Micro USB cable to the Micro USB port on the rear of your scanner. Connect the cable to your computer.
       
    2. Double-click the DSmobileCapture icon DSmobileCapture.
       
    3. The Select Scanner Model dialog box appears. Select TWAIN under Driver Type and select your model under Scanner Model, and then click OK.
       
    4. DSmobileCapture launches.
       
      DSmobileCapture

     

  2. Click Setup.
     
  3. Click the Image tab.
     
    Win_ImageSettings

     

  4. Change the settings you want, and then click OK. Continue scanning operation.

 

 

(Macintosh)
  1. Launch DSmobileCapture.

     

    1. Connect the supplied Micro USB cable to the Micro USB port on the rear of your scanner. Connect the cable to your computer.
       
    2. Double-click the DSmobileCapture icon DSmobileCaputureShortcutMac.
       
    3. DSmobileCapture launches.
       
      Mac_DSmobileCapture

     

  2. Click the Image and change the settings you want.  Continue scanning operation.
     
    Mac_ImageSettings

Related Models

DS-620, DS-720D, DS-820W, DS-920DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.