TJ-4420TN
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/lptj4420tneus.jpg)
TJ-4420TN
Date: 07/15/2021 ID: faqp00100545_000
Switch between the wired network and Wi-Fi® network/Bluetooth® connection
- Make sure you update your printer's firmware to ver.B1.17.S24 or later. (See "How to update the firmware")
- To use Wi-Fi or Bluetooth, the optional WLAN / BT Interface (PA-WB-001) is required.
- Turn the printer on.
- Press [Menu] - [Interface] - [Network Interface].
-
Select [Auto], [Wi-Fi/Bluetooth], or [Ethernet].
Setting Connection Mode Auto Wi-Fi network/Bluetooth connection (when the WLAN / BT Interface (PA-WB-001) is installed before the printer is turned on)
Wired network connection (when the WLAN / BT Interface (PA-WB-001) is not installed before the printer is turned on)
Wi-Fi/Bluetooth Wi-Fi network/Bluetooth connection (when the WLAN / BT Interface (PA-WB-001) is installed) Ethernet Wired network connection
When finished, the printer will restart automatically.You cannot use the wired network and Wi-Fi network/Bluetooth connection simultaneously.
TJ-4420TN, TJ-4520TN, TJ-4522TN, TJ-4620TN
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.