RJ-3035B
FAQs & Troubleshooting |
RJ-3035B
Date: 11/05/2021 ID: faqp00100535_000
I cannot pair the printer with a Bluetooth® device as my iOS / iPadOS device reconnects to the printer automatically.
A previously paired iOS/iPadOS device will reconnect to the printer automatically if the printer's automatic Bluetooth reconnection feature is enabled.
- Turn off the Bluetooth feature of the previously paired iOS/iPadOS devices.
- Try to pair the printer with your Bluetooth device.
-
If the problem still occurs, disable the automatic Bluetooth reconnection feature:
- Connect the printer to a Windows computer using a USB cable.
- Start the BPM (Brother Printer Management Tool). You can download the BPM from the [Downloads] section of this website.
-
Click Command Tool.
-
Type the following command, press the Enter key, and then click Send:
SET BTLINKBACK OFF - If you do not press the Enter key before clicking Send, the command will not be executed.
-
To enable the automatic Bluetooth reconnection feature, type the following command and press the Enter key, and then click Send:
SET BTLINKBACK ON
RJ-2035B, RJ-3035B
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.