DC200
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hf_dc200eus.jpg)
DC200
Date: 06/30/2021 ID: faqh00100753_000
How to set up the wireless connection using router’s WPS button. (Mobile Device Instructions)
[IMPOTRTANT NOTICE]
Distribution of "DesignNCut Manager for mobile device" ended as of June 2021.
For new installation, please use DesignNCut Manager for computer.
Follow the instructions below to connect the machine and mobile device using wireless LAN.
For computer, click here.
If your wireless LAN access point/router is equipped with a WPS (Wi-Fi Protected Setup™) button, locate it and proceed with the following steps:
To use WPS, your wireless access point/router must support WPS. Confirm your wireless access point/router has the WPS symbol as shown below. For more details, refer to the instructions provided with your access point/router.
-
Startup the DesignNCut Manager, and then tap [Start Setup] on the guidance screen.
-
Tap [Connect] .
-
Turn on the machine, and then tap
-
Select [Use Router’s WPS button].
-
Turn off the DesignNCut machine, by pressing
.
-
Press
and the
on the operation panel at the same time, once the power comes on release
while still pressing down
.
-
When the message Machine mode? appears on the machine’s LCD, press
to select WLAN.
-
When the message Turn the machine off, then on again. appears, turn the machine off, then on again.
Once your machine is back on, the message Standby (WLAN) appears.
-
Press your router's WPS button.
The location of the WPS button differs depending on your device.
-
Press
on your DesignNCut machine.
-
When the message Enable WLAN? appears on the machine’s LCD, press
to select Yes.
Give your machine time to connect to your wireless network.
-
When the message Connected to WLAN. Press [OK] button. appears on the machine’s LCD, press
on your machine.
-
The Wireless LAN Connect light will turn on.
(1) Wireless LAN Connect light
-
Go back to DesignNCut Manager and tap [Connect] .
-
Select the machine number and then tap [Done] .
Depending on the settings of the wireless LAN access point/router, the machine name may not be displayed correctly. In that case, select the number or letter that is listed in the screen, and tap [Done] .
To check your machine's number, press
to display the 2. Machine Info on the machine’s LCD, and then press
. When 1. No. appears on the LCD, press
.
Your machine’s number will be displayed on the machine’s LCD.
-
Create a CanvasWorkspace (Web) account.
- If you created an account, tapand continue to step 17.
- If no, tap CanvasWorkspace (Web) on the following screen to access to <https://canvasworkspace.brother.com> to register a new account.
After registering, tapand go to step 17.
- If you have a CanvasWorkspace (Web) account for your ScanNCut we recommend creating a new account for DesignNCut. CanvasWorkspace (Web) is our easy to use free cloud-based editing software.
- CanvasWorkspace (Web) allows you to edit and create files at your convenience. It has hundreds of Free Projects & Cut files with step by-step instructions and how-to videos. CanvasWorkspace (Web) also allows you to upload SVG, DXF (AutoCAD files) & FCM files to use as your cut files. CanvasWorkspace (Web) is also used for cut data mat positioning.
-
Tap [Connect] .
-
Register dialog box will appear.
Type in the login ID and password registered with CanvasWorkspace (Web) , and then tap [Register] .
-
When the ScanNCut Online Settings has been completed dialog box appears, tap [OK] .
-
Tap
.
Once you completed the connection and CanvasWorkspace (Web) registration you can create a pattern on CanvasWorkspace (Web) <https://canvasworkspace.brother.com> and cut the data with DesignNCut by operating DesignNCut Manager. Refer to How do I transfer the pattern (to cut, draw, line emboss, etc.) using a Wireless LAN connection? (Mobile Device Instructions)
Tap [How to Use] on the DesignNCut Manager to see tutorial for the basic usage.
After the settings have been completed, your machine number and your CanvasWorkspace (Web) login ID will be shown in the DesignNCut Manager’s main window.
DC200, DC200ULE
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.