MFC-9560CDW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc9560cdw_us.jpg)
MFC-9560CDW
Date: 05/11/2020 ID: faq00100029_004
Enable the Brother machine's network interface.
Follow the steps below to enable or disable the Brother machine's network interface (wired LAN or wireless LAN).
A wired and a wireless network connection cannot be used at the same time. Enable the network connection type you want to use and then disable the other.
- Press Menu.
- Press the Up or Down arrow key to select Network. Press OK.
- Press the Up or Down arrow key to select Wired LAN or WLAN. Press OK.
- Press the Up or Down arrow key to select Wired Enable or WLAN Enable. Press OK.
- Press the Up or Down arrow key to select On or Off.
- Press OK.
- Press Stop/Exit or Cancel.
(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.
If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.
Related FAQs
- I'm trying to install the driver with network settings, but I cannot locate a network connected Brother machine and complete the driver installation. (For Windows)
- I can print but cannot scan via network. (For Windows)
- I can print but cannot scan via network. (For Mac)
- The printer status is Offline or Paused.
- "Offline" appears on the Status Monitor.
- I cannot print using my Brother machine on a wireless network (Mac)
- I cannot print using my Brother machine on a wireless network (Windows)
- I cannot print using my Brother machine on a wired network. (Windows/macOS)
DCP-1617NW, DCP-L2540DW, DCP-L2550DW, DCP-L3551CDW, HL-2280DW, HL-S7000DN, MFC-7860DW, MFC-8690DW, MFC-8710DW, MFC-8712DW, MFC-8810DW, MFC-8890DW, MFC-8910DW, MFC-8912DW, MFC-9320CW, MFC-9325CW, MFC-9560CDW, MFC-L2700DW, MFC-L2705DW, MFC-L2707DW, MFC-L2710DW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.