DCP-T220
FAQs & Troubleshooting |
DCP-T220
Date: 02/04/2021 ID: faq00100000_034
Check the firmware version.
Follow the steps below to check the firmware version.
-
Start Brother iPrint&Scan.
-
Windows
Launch (Brother iPrint&Scan). -
Mac
In the Finder menu bar, click Go > Applications, and then double-click the iPrint&Scan icon.
-
Windows
- If your Brother machine is not selected, click the Select your Machine button, and then select your model name from the list. Click OK.
- Click (Machine Settings) to configure the settings.
-
If required, type the password in the Login field, and then click Login.
The default password to manage this machine's settings is located on the back of the machine and marked "Pwd".
-
Go to the navigation menu, and then click General > Maintenance Information.
Start from , if the navigation menu is not shown on the left side of the screen.
-
Check your Brother machine's firmware version.
You can also check your Brother machine's firmware version with the Print Quality Check Sheet.
DCP-T220, DCP-T226, DCP-T420W(-V), DCP-T426W
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.