MFC-8712DW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc8712dw_us.jpg)
MFC-8712DW
Date: 05/10/2012 ID: faq00002645_004
When I try to feed a document from the ADF (automatic document feeder), it misfeeds or the corner of the paper bends.
Please check the following points to solve the problem.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
- Place your document face up, top edge first in the ADF (automatic document feeder) until you feel it touch the feed roller and the LCD screen changes.
- Adjust the paper guides (1) to fit the width of your document.
- Ensure the ADF cover is firmly closed.
- Check the paper thickness. If it's thick, use the scanner glass to fax, copy or scan.
- Make sure the paper is straight. If the paper is curled, straighten it.
- Check the document size and if it's small, use the scanner glass to fax, copy or scan.
- Take out any paper from the ADF. Open the ADF cover and check if there is any jammed paper inside.
Related FAQs
DCP-8110DN, DCP-8112DN, DCP-8150DN, DCP-8152DN, DCP-8155DN, DCP-8157DN, MFC-8510DN, MFC-8512DN, MFC-8710DW, MFC-8712DW, MFC-8810DW, MFC-8910DW, MFC-8912DW, MFC-8950DW, MFC-8950DWT, MFC-8952DW, MFC-8952DWT
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.