MFC-8710DW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc8710dw_us.jpg)
MFC-8710DW
Date: 04/26/2012 ID: faq00000292_033
What kind of memory can I use?
Your Brotesr machine has 64 MB of standard memory and one slot for optional memory expansion. You can expand the memory up to 320 MB by installing dual in-line memory modules (SO-DIMMs).
In general, the machine uses industry-standard SO-DIMM with the following specifications:
Type: 144-pin and 16-bit output
CAS latency: 4
Clock frequency: 267 MHz (533 Mb/S/Pin) or more
Capacity: 256 Mbyte
Height: 30.0 mm (1.18 in.)
DRAM type: DDR2 SDRAM
SDRAM can be used.
- There might be some SO-DIMMs that will not work with the printer.
- For more information, call the dealer you bought the printer from or Brother Customer Service form "Contact Us".
DCP-8110DN, DCP-8112DN, DCP-8150DN, DCP-8152DN, HL-5450DN, HL-5452DN, MFC-8510DN, MFC-8512DN, MFC-8710DW, MFC-8712DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.