ADS-2000e
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/ads2000e_us.jpg)
ADS-2000e
Date: 02/03/2012 ID: faq00000168_006
Service Call
If all the LEDs are blinking as shown in the illustration below, turn the machine off and then on by unplugging the machine from the AC power outlet (electrical socket) and then plugging the machine in again.
If the LEDs continue to display the error, your Brother machine needs service.
Please follow the steps below to identify the problem first, and then report the Error Code to your dealer or Brother Customer Service.
- Press Scan to PC and check which LED lights up and then press Scan to USB and check which LED lights up. The LED will right up as shown in the table below.
Error Code
When pressing the Scan to PC key
When pressing the Scan to USB key
0 x A7
0 x A9
0 x E6
- Make a note of error code referring to the table above, and report the code to your dealer or Brother Customer Service from Contact Us.
ADS-2000, ADS-2000e
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.