MFC-L8895CDW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfcl8895cdw_us.jpg)
MFC-L8895CDW
Date: 03/23/2022 ID: faq00000006_042
Vertical colored streaks or bands appear on the page
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
Check the following points to resolve the issue:
-
(For models with Automatic Document Feeder only)
Wipe the scanner glass strip with a dry lint free soft cloth.
> Click here to see how to clean the scanner glass strip. -
Clean all four corona wires (one for each color) inside the drum unit by sliding the green tab.
> Click here to see how to clean the corona wires.
-
Make sure the green tab of the corona wire is in the home position (1).
-
Replace the toner cartridge that matches the color of the streak or band.
To identify the color of the toner cartridge, follow the steps below:- > Click here to print the chart. [345KB/ PDF]
- Compare your printed document with the printed chart to identify the color causing the issue.
-
Replace the toner cartridge of the color.
> Click here to see how to replace the toner cartridge.
-
Install a new drum unit.
> Click here to see how to replace the drum unit.
MFC-EX670W, MFC-L8610CDW, MFC-L8895CDW, MFC-L8900CDW, MFC-L8905CDW, MFC-L9610CDN, MFC-L9630CDN, MFC-L9670CDN
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.