FAQs & Troubleshooting

Close

RJ-3150

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 07/16/2021 ID: faqp00000479_002

How can I change the IP address in order to use the product in a different network environment?

You can change your printer's network settings (IP address, Subnet mask and Gateway) using the BRAdmin Light utility.

The BRAdmin Light utility is designed for the initial setup of Brother network connectable devices. It can also search for Brother products in a TCP/IP environment, show the status and configure basic network settings, such as the IP address.

 

<Installing BRAdmin Light >
 

  1. Download BRAdmin Light from the [Downloads] section of this website.

  2. Double-click the downloaded .exe file and follow the on-screen instructions to proceed with the installation.
  • If you require more advanced printer management, use the latest Brother BRAdmin Professional utility available from the [Downloads] section.
  • If you are using firewall, anti-spyware, or antivirus software, temporarily disable them. Once you are sure that you can print, re-enable them.

  • The node name appears in the current BRAdmin Light window. The default node name of the print server in the printer is “BRWxxxxxxxxxxxx” or "BRNxxxxxxxxxxxx". (“xxxxxxxxxxxx” is based on your Brother printer’s Ethernet Address.)

 

<Setting the IP address, Subnet Mask and Gateway using BRAdmin Light>

 

  1. Start the BRAdmin Light utility.
    • Windows 10 / Windows Server 2016 / Windows Server 2019 :
      Click [Start Menu] - ([All apps] -) [Brother] - [BRAdmin Light]
    • Windows 8 / Windows 8.1 / Windows Server 2012 / Windows Server 2012 R2:
      Click [BRAdmin Light] icon on [Apps] screen.
    • Windows 7 / Windows Vista / Windows Server 2008 / Windows Server 2008 R2:
      Click [Start] - [All Programs] - [Brother] - [BRAdmin Light] - [BRAdmin Light].
  2. BRAdmin Light will search for new devices automatically.
     

  3. Double-click the unconfigured device.
    bradmin light

    If you don’t use a DHCP/BOOTP/RARP server, the device will appear as [Unconfigured] in the BRAdmin

    Light utility screen.

  4. Choose [STATIC] for the [Boot Method]. Enter the [IP Address], [Subnet Mask] and [Gateway] (if needed) of your print server.
    bradmin light

  5. Click [OK].

  6. With the correctly programmed IP address, you will see the Brother print server in the device list.

Related Models

RJ-2050, RJ-2140, RJ-2150, RJ-3050, RJ-3050Ai, RJ-3150, RJ-3150Ai, RJ-4250WB, TD-4550DNWB

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.