FAQs & Troubleshooting

Close

Model discontinued. This page is no longer updated.

PS-9000

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 12/23/2014 ID: faqp00000481_000

The "ping" command reports that I can communicate with the PS-9000, but I cannot print.

Check the following to identify the cause of the problem.

 

  • [There may be another device assigned with the same IP address, which may be responding to the "ping " command]

    Check the IP address in "arp -a" command, after send to "ping" command.
    Check the IP address of the devices on your network. If you find the duplicate IP addresses, assign a different IP address to one of the devices.

    TIP"arp -a"To verify if this is the case, after you send the "ping" command, issue "arp -a" command, then, check the arp table to see if the target device has a proper combination of the IP address and Ethernet Address. If there is a duplicated IP address exists, in the "arp" table there will be an unmatched combination of the Ethernet address and associated IP addresses.

    Image
  • [Your printer driver on your PC may not be properly installed]

    Check if the printer driver is properly installed.
    If a printer port has not been assigned to the printer driver, set up the printer port using the Brother PS-9000 Utility.
  • [Check if there is any security software function such as firewall in the server or another network device]

    The security software function may be interrupting network communication with the product. Disable the function to see if the problem continues.

 

Related Models

PS-9000, PS-9000, PT-9200DX, PT-9500PC, QL-1050, QL-1050N, QL-500, QL-550, QL-650TD

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.