MFC-L2740DW
 |
FAQs & Troubleshooting |
MFC-L2740DW
Date: 03/24/2016 ID: faq00000208_044
Clean the corona wire
Follow the steps below to clean the corona wire.
-
Open the front cover.
-
Remove the toner cartridge and drum unit assembly from the machine.
-
Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times.
Be sure to return the tab to the Home position (
). The arrow on the tab must be aligned with the arrow on the drum unit. If it is not, printed pages may have a vertical stripe. -
Install the toner cartridge and drum unit assembly back into the machine.
- Close the front cover of the machine.
DCP-L2520DW, DCP-L2540DW, HL-L2380DW, MFC-L2680W, MFC-L2685DW, MFC-L2700DW, MFC-L2705DW, MFC-L2707DW, MFC-L2720DW, MFC-L2740DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.