MFC-J5930DW
FAQs & Troubleshooting |
MFC-J5930DW
Date: 07/31/2024 ID: faq00100360_501
Check the Print Alignment from Your Brother Machine
If your printed text becomes blurred or images become faded after transporting the machine, adjust the print alignment.
MFC-J5330DW
- Press .You can also press.
- Press [Next].
- Press or to display the paper size that needs a print alignment adjustment, and then press it.
- Press [Basic alignment] or [Advanced alignment].
- Load the selected paper size in the tray, and then press [Start].The machine prints the Alignment Check Sheet.
- For the (A) pattern, press or to display the number of the test print with the fewest visible vertical stripes (1-9), and then press it (in the example above, row number 6 is the best choice). Press [OK].
Repeat this step for the rest of the patterns.
When the print alignment is not adjusted correctly, text looks blurry or crooked, like this.
After the print alignment is adjusted correctly, text looks like this.
- Press .
MFC-J5830DW/MFC-J5930DW
- Press .You can also press.
- Press [Next].
- Swipe up or down or press or to display the paper size that needs a print alignment adjustment, and then press it.
- Press [Basic alignment] or [Advanced alignment].
- Load the selected paper size in the tray, and then press [Start].The machine prints the Alignment Check Sheet.
- For the “A” pattern, swipe up or down or press or to display the number of the test print with the least visible vertical stripes (1-9), and then press it (in the example, number 6 is the best choice). Press [OK].
Repeat this step for the rest of the patterns.
When the print alignment is not adjusted correctly, text looks blurry like this.
After the print alignment is adjusted correctly, text looks like this.
- Press .
MFC-J5330DW, MFC-J5830DW(XL), MFC-J5930DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.