MFC-J5620DW
 |
FAQs & Troubleshooting |
MFC-J5620DW
Date: 06/12/2014 ID: faq00003017_007
Copy Both Sides of an ID Card onto One Page
You can copy both sides of an ID card onto a single page, keeping the card's original size.
- The machine's paper size must be set to Letter or A4.
- You can only make one color copy at a time.
- You cannot use the Watermark Copy, Book Copy, Sort, 2-sided Copy, Thin Paper Copy, Ink Save Mode, Enlarge/Reduce, and Remove Background Color settings with the 2in1 (ID) feature.
To use your Brother machine's 2 in 1 ID Copying feature, follow these steps:
-
Place your identification card face down near the upper-left corner of the scanner glass.
- 3 mm (0.12 in.)or greater (top, left)
-
216 mm (8.5 in.)
-
140 mm (5.5 in.)
-
scannable area
-
Press
(Copy).
-
Enter the number of copies:
- Press - or + on the Touchscreen.
- Press the number of copies to display the keyboard on the Touchscreen, and then enter the number of copies using the Touchscreen. Press OK.
-
Press Options > Page Layout > 2in1 (ID).
-
Read and confirm the displayed list of settings you have selected, and then press OK.
-
Press Black (Mono) Start or Color (Colour) Start.
The machine starts scanning one side of the identification card.
- After the machine has scanned the first side, press Yes. Turn over the identification card and press OK to scan the other side.
MFC-J4320DW, MFC-J4420DW, MFC-J4620DW, MFC-J5520DW, MFC-J5620DW, MFC-J5720DW, MFC-J5920DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.