FAQs & Troubleshooting

Close

MFC-9970CDW

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-9970CDW

Not your product?

Date: 10/15/2010 ID: faq00002411_009

Cover is Open

Check the following to clear the message:


NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.


  • The front cover is not completely closed. Close the front cover of the machine.

    image

  • The ADF cover is not completely closed. Close the ADF cover of the machine.

    image



  • The ADF is open while loading a document. Close the ADF cover of the machine, then press Stop/Exit.

  • The fuser cover (1) is not completely closed or paper was jammed in the back of the machine when you turned on the power.  Make sure paper is not jammed inside the back of the machine, and then close the fuser cover (1) and press Black (Mono) Start or Color (Colour) Start.



    image



 

Related Models

MFC-9460CDN, MFC-9560CDW, MFC-9970CDW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.