FAQs & Troubleshooting



FAQs & Troubleshooting

FAQs & Troubleshooting


Not your product?

Date: 01/29/2013 ID: faq00000315_015

Replace WT (waste toner) Box

Follow the steps below to replace waste toner box.

For the order number (Order No.) of the waste toner box, click here to see the Consumables & Options page.

  1. Make sure that the machine is turned on.

  2. Open the top cover until it locks in the open position.

    Open top cover

  3. Take out all of the toner cartridge and drum unit assemblies.

    Take out toner and drum

  4. Hold the green handle of the belt unit and lift the belt unit up, and then pull it out.

    Take out belt unit

  5. Remove the orange packing material and discard it.

    Remove packing material 

    This step is only necessary when you are replacing the waste toner box for the first time, and is not required for the replacement waste toner box. The orange packing pieces are installed at the factory to protect your machine during shipment.

  6. Hold the green handle of the waste toner box and remove the waste toner box from the machine.

    Remove waste toner box

  7. Unpack the new waste toner box and install the new waste toner box in the machine.

    Install new waste toner box

  8. Put the belt unit back in the machine.

    Put in belt unit

  9. Slide each toner cartridge and drum unit assembly into the machine. Make sure that you match the toner cartridge color to the same color label on the machine. Repeat this step for all the toner cartridge and drum unit assemblies.

    Put in toner and drum

    Toner color match

  10. Close the top cover of the machine.

Related Models

HL-3180CDW, MFC-9130CW, MFC-9330CDW, MFC-9340CDW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.