FAQs & Troubleshooting

Close

MFC-9130CW

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-9130CW

Not your product?

Date: 02/14/2013 ID: faq00002658_009

No Toner

The toner cartridge or the drum unit and toner cartridge assembly is not installed correctly.

Remove the toner cartridge and drum unit assembly for the color indicated on the the machine's display (hereinafter called LCD), remove the toner cartridge from the drum unit, and reinstall the toner cartridge back into the drum unit. Reinstall the toner cartridge and drum unit assembly back in the machine following the steps below:

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

  1. Make sure that the machine is turned on.
  2. Open the top cover until it locks in the open position.

    Open top cover

  3. Remove the toner cartridge and drum unit assembly for the color shown on the LCD.

    Take out toner and drum

  4. Push down the green lock lever and take the toner cartridge out of the drum unit.

    Take out toner from drum

  5. Put the toner cartridge firmly into the drum unit until you hear it lock into place. If you put it inproperly, the green lock lever on the drum unit will lift automatically.

    Put in toner in drum

  6. Slide the toner cartridge and drum unit assembly into the machine. Make sure that you match the toner cartridge color to the same color label on the machine.

    Put in toner and drum


    Toner color match

  7. Close the top cover of the machine.

Related Models

HL-3180CDW, MFC-9130CW, MFC-9330CDW, MFC-9340CDW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.