FAQs & Troubleshooting

Close

MFC-8910DW

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-8910DW

Not your product?

Date: 04/27/2012 ID: faq00000017_029

Ghost

Print Quality Problem - Ghost

 

Please check the following points to solve the problem:

  • Make sure that you use paper that meets our specifications. Rough-surfaced paper or thick print media may cause this problem.
    Please refer to the FAQs "What kind of paper can I use?" and "What is the recommended paper?"

  • Make sure that you choose the appropriate media type in the printer driver or in the machine's Media Type menu setting.
    Please refer to the FAQ "What kind of paper can I use?"

  • Choose Reduce Ghosting mode in the printer driver.
     

    Do not use this setting if the humidity is below 30% or ghosting may increase.

    For Windows users:
    NOTE: The steps and screens may differ depending on the operating system and application being used.

     
    1. From the menu bar of an application, click File => Print.

      Application

    2. Check your printer name is chosen and click Properties

      Properties

    3. Click the Advanced tab and then Other Print Options.

      Click Other Print Option

    4. Click Improve Print Output and check the Reduce Ghosting box. 

      Check Reduce Ghosting

    5. Click OK to close the Other Print Options dialog.
    6. Click OK to close the Properties dialog.
    7. Click OK. The document will be printed.
     

    For Mac OS X CUPS Printer Driver:
    NOTE: The steps and screens may differ depending on the operating system being used.

     
    1. Choose Print from the File menu and open the Print dialog.
    2. Choose Print Settings from the print options pop-up menu.
    3. Click the Advanced triangle mark.
    4. Choose Improve Print Output.
    5. Check the Reduce Ghosting box.  

      Choose Improve Print Output

    6. Click Print.

  • Put in a new toner cartridge.
    Please refer to the FAQ "Replace Toner".
  • Put in a new drum unit.
    Please refer to the FAQ "Replace Drum".
  • The fuser unit may be contaminated. Please contact Brother Customer Service from "Contact Us".

 

    Related Models

    DCP-8110DN, DCP-8150DN, DCP-8155DN, FAX-2840, FAX-2940, HL-5440D, HL-5450DN, HL-5470DW, HL-5470DWT, HL-6180DW, HL-6180DWT, MFC-7240, MFC-8510DN, MFC-8710DW, MFC-8810DW, MFC-8910DW, MFC-8950DW, MFC-8950DWT

    If you need further assistance, please contact Brother customer service:

    Content Feedback

    To help us improve our support, please provide your feedback below.
    Step 1: How does the information on this page help you?
    Step 2: €Are there any comments you would like to add?

    Please note this form is used for feedback only.