MFC-8710DW
 |
FAQs & Troubleshooting |
MFC-8710DW
Date: 05/10/2012 ID: faq00002647_001
When I send a fax from the machine, an error "not register." or "not registered." is displayed.
The Fax to server may be ON and this may cause the problem.
To solve the problem make sure that Fax to server is OFF.
There are two ways to change the settings of Fax to server: by using the control panel and by using the Web Based Management.
Please choose the appropriate way and follow the steps below.
Method 1: using the control panel
- Press Menu.
- Choose Network and Fax to Server.
- Choose Off and then press OK.
- Press Stop/Exit.
Method 2: using the Web Based Management
- Start your web browser.
- Type "http://machine's IP address/" into your browser (where "machine's IP address" is your machine's IP address).
For example: http://192.168.1.2/ - Click Fax and Fax to Server.
- Choose Off.
- Click Submit.
DCP-8110DN, DCP-8150DN, DCP-8155DN, MFC-8510DN, MFC-8710DW, MFC-8810DW, MFC-8910DW, MFC-8950DW, MFC-8950DWT
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.