FAQs & Troubleshooting

Close

MFC-8710DW

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-8710DW

Not your product?

Date: 10/17/2012 ID: faq00002966_003

Print from a computer using Print Profiles.

Print Profiles allow you to choose from a range of pre-defined and user customizable print settings, helping you to save the time and effort of having to manually change them yourself every time you want to print.


NOTE: Illustrations shown below are from a representative product and operating system, and may differ from your Brother machine and operating system.
 

PRINT USING A PRINT PROFILE


  1. Within the application you wish to print from choose the print option.

  2. Click PROPERTIES to open the Printing Preferences window.

    The steps may vary depending on your application.

  3. On the Print Profiles Tab, choose the desired Print Profile from the list and then click OK. The default Profiles are as follows:

    The available options may vary depending on your model.

    Print Profiles Tab

    1. General Print: Suitable for general, everyday printing using standard paper.

    2. Paper Save Print: Suitable for printing presentations and rough copies of your documents.  This setting will combine 8 pages to every piece of paper (4 on each side).

    3. Toner Save Print: Ideal for less important documents that do not require a professional finish. Printouts will appear fainter than in any other profile but will use less toner.

    4. Two Sided (Duplex) Print: This setting will automatically print on both sides of the paper.

    5. Booklet Print: Print easy-to-read, professional documents as a half size booklet by printing 4 pages to every piece of paper (2 pages per side) and folding it in the middle.

  4. Once you are in the Print Dialog box for your application, click OK or Print (depending on your application). The document will print using the settings from the chosen Print Profile.


ADD A PRINT PROFILE


  1. Open Printing Preference. (Click here to see how to open Printing Preferences.)

  2. Make any desired print adjustments on the Basic and Advanced Tab and then click Apply.

  3. Click on the Print Profiles Tab.

  4. Click Add Profile. This will allow you to save your current print settings to a profile for easy selection later.
    Add Profile

  5. Give your edited profile a name and choose an icon.

  6. Click OK.

    The following settings cannot be saved to a Print Profile:

    • Copies
    • Orientation

  7. If you want the Print Profiles tab to always appear first when you enter the printer driver, place a check in Always show Print Profiles tab first.


DELETE A PRINT PROFILE


You can only delete profiles that you created. You cannot delete a preconfigured Print Profile.

  1. Open Printing Preference. (Click here to see how to open Printing Preferences.)

  2. Click on the Print Profiles Tab.

  3. Click on the profile that you would like to delete and then click Delete Profile.

  4. You will see a list of all profiles that you have created. Click on the desired profile and then click Delete.
    Delete Profile

  5. When asked to confirm, click Yes.
    Delete Profile

  6. Click Close.

Related Models

DCP-8110DN, DCP-8150DN, DCP-8155DN, HL-5440D, HL-5450DN, HL-5470DW, HL-5470DWT, HL-6180DW, HL-6180DWT, MFC-8510DN, MFC-8710DW, MFC-8810DW, MFC-8910DW, MFC-8950DW, MFC-8950DWT

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.