MFC-7225N
 |
FAQs & Troubleshooting |
MFC-7225N
Date: 01/27/2014 ID: faq00000195_015
When scanning a document to be copied, the LCD shows "OUT OF MEMORY". What should I do?
If the memory becomes full while you are making copies, the LCD message will guide you through the next step.
If you get an Out of Memory message while scanning a subsequent page, you will have the option to press Start to copy the pages scanned so far, or to press Stop/Exit to cancel the operation.
If you see the error message while you are printing, reduce print resolution.
To gain extra memory..
- You can turn off Fax Storage.
- Print the faxes that are in the memory. When you get an Out of Memory message, you may be able to make copies if you first print incoming faxes in the memory to restore the memory to 100%.
FAX-2820, FAX-2920, MFC-7220, MFC-7225N, MFC-7420, MFC-7820N
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.