HL-7050N
 |
FAQs & Troubleshooting |
HL-7050N
Date: 03/20/2012 ID: faq00000355_004
Why does the LCD of my machine display "CHANGE DRUM SOON"?
The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge. If you want to know their difference, refer to "What is the difference between the toner cartridge and the drum unit?"
- This message would appear if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one.
-
This message would continue to appear if the drum counter was not reset when you replaced the drum. To reset the drum follow the instructions below:
- Open the top cover.
- Hold down the Go button for more than 4 seconds to reset the drum counter.
-
Close the top cover.
Reset the drum counter only when you replaced the drum unit with a new one.
HL-7050, HL-7050N
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.