HL-2170W
 |
FAQs & Troubleshooting |
HL-2170W
Date: 05/17/2013 ID: faq00002526_000
"Clean Corona Wire" message continues to appear on the PC screen, even though I have cleaned the corona wire of the drum unit.
"Clean Corona Wire" message appears at certain times to maintain the best print quality.
Check to see if the Toner LED is on.
If the Toner LED is on:
Check to see if the drum unit assembly is installed correctly. If not, take the drum unit out of the machine and put it back in.
If the drum unit assembly is correctly installed, and still the Toner LED is on, the toner cartridge is empty. Replace the toner cartridge with a new one. Click here to learn how to replace the toner cartridge.
If still the Toner LED is on after replacing the toner cartridge,refer to the Related FAQs at the end of the page.
Related FAQs
- What do the LED indications mean?
- Drum Life End Soon
- The LEDs on the control panel of the printer indicate "Drum Error". Though I cleaned the corona wire, this error message was not cleared. What can I do?
- I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Life End" or the Toner LED is still on or flashing.
HL-2140, HL-2170W
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.