SDX330D
FAQs & Troubleshooting |
SDX330D
Date: 08/28/2023 ID: faqh00101665_000
M5613201 appears on the Artspira app screen.
Error Message
The data could not be sent. (M5613201)
-
Cause
This message is displayed when the wireless LAN signal is lost after selecting "Print" in "Printing Patterns" under "Printing" in "New".
-
Solutions
The printer and the Artspira device must be connected during the data transfer. Make sure they are connected to the same network.
For example, make sure the printer and access point are turned on, the printer is connected to the network, the device is not too far from the access point, and the wireless LAN signal is properly received.
- "Printing Patterns" is available when a Creative Printer is set in the device settings.
- This function is not available in some countries or regions.
Innov-is NQ1700E, Innov-is NQ3550W, Innov-is NQ3700D, Innov-is NS1250E, Innov-is NS1850D, Innov-is NS2850D, Innov-is XE1, Innov-is XE2, Innov-is XJ1, Innov-is XJ2, Innov-is XP1, Innov-is XP2, Innov-is XP3, LB5500, PE545, PE570, PE900, PP1, PR1055X, PR680W / PR680WC, SDX125, SDX125e, SDX125e Titanium, SDX125i, SDX125TS, SDX135PRO, SDX225, SDX225F, SDX230D, SDX230Di, SDX230DX, SDX325, SDX330D, SDX85, SDX85C, SDX85M, SDX85S, SE2000, SE700, SE725, SP-1
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.