FAQs & Troubleshooting

Close

PR670E / PR670EC

FAQs & Troubleshooting

FAQs & Troubleshooting

PR670E / PR670EC

Not your product?

Date: 03/10/2022 ID: faqh00100494_001

How do I delete short stitches ?

If embroidery data other than our original patterns are used, the stitch length may be too short, possibly resulting in the thread or the needle breaking. In order to prevent this problem from occurring, the machine can be set to delete stitches with a short stitch length. Stitches with a length less than that specified in this function, can be deleted.

When the embroidery machine is purchased, “0.3” was selected (delete stitches with a length of 0.3 mm or less).

 

  1. Press  (setting key) at the bottom of the display.
     
  2. The settings screen appears, press  to display page 2 of the settings screen.
     
  3. Touch "+" and "-" to select the stitch length.
    The desired size is displayed.

     img
    • A value between 0 and 1 millimeters if the units of measurements is set to “mm” (or a value between 0 and 0.04 inch if the units of measurements is set to “inch”) can be specified.
    • If the setting is changed from the previous setting, the new setting is only applied to the next embroidery.

Related Models

PR1055X, PR670E / PR670EC, PR680W / PR680WC

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.